Description
For container wall thicknesses of 8-12 mm
The standard types of the same design are for wall thicknesses of 1-4 mm. This special type is for thick-walled container walls of 8-12 mm. All you need is a hole with a diameter of 21.3 mm. Insert the float switch into your tank from the outside through this hole(external installation). Then carefully tighten the screw connection.
In the installation position shown, it switches when the liquid rises. By turning the float switch through 180°, it switches when the liquid is sinking.
Vorteile:
-
- kostengünstig
-
- einfache Montage von außen
-
- Erkennung Ihrer gewünschten Füllhöhe
-
- Schaltfunktion umkehrbar
